Quickflex Revolution Heat Transfer Vinyl
Chemica's Quickflex Revolution HTV is a water based PU htv that is solvent free. This gives it a matte finsih and a soft feel. It is sutiable for all fabric types and is very stretchable and soft!
- 15" width
- Soft Matte Finish
- Works on Cotton, Polyester, Acrylic, Cotton/Poly blends, Nylon
- Water-based
- Solvent Free PU
- 90 Microns
- Medium-Tack Clear Polyester
- Super flexible, great for stretchable garments
- Easy to cut, weed, and peel hot or cold
- Due to the manufacturing process, material may vary in width by 1/4-1/2"
- Accessories
- Hotmark Revolution Low Temp HTV 12" Sheets
- Chemica HTV
- Heat Transfer Equipment
15" Pricing:
5 yd roll = $36.00
22 yd roll = $150.00
- See below for temperature on different garments
- See time specific instructions below
- See below for the peel temperature on different garments
- Medium, even pressure
- Cut in reverse
- Cotton, polyester, nylon, acrylic
- Wash inside out, tumble dry on low heat
Additional Instructions
Application instructions
for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cotton
- 245°
- 20 seconds
Or
- 285°
- 5 seconds
- Peel Hot or Cold
Cotton/Poly Blends
- 250°
- 20 seconds
Or
- 285°
- 5 seconds
- Peel Hot or Cold
Nylon
- First Press
- 285°
- 5 seconds
- Second Press
- 285°
- 15 seconds
- Peel Hot or Cold
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
1. Smooth Heat Transfer Material Setting
2. Blade at a 2
3. Speed at 8
4. Pressure at 6
- dropship_colors:
- all
- Width:
- 15" Width
