WALAKut Express 12" Sheets Heat Transfer Vinyl – Soft, Elastic & Easy to Apply

WALAKut-Express is a thin, elastic, soft to the hand vinyl that blends well into the textiles. Low-temperature application prevents undesirable effects such as glossiness and fiber damage!

Low-Temperature Application for No Gloss

This vinyl can be applied at low temperatures, preventing unwanted glossiness or damage. It's designed for a variety of textiles, including cotton and polyester, while maintaining a soft feel.

Durable with REACH and Öko-Tex® Certified

WALAKut Express is CPSIA certified and meets international safety standards, including REACH and Öko-Tex® Standard 100 Class I, making it ideal for custom apparel.

• 11.8" x 12"
• 90 micron thick
• Matte finish
• Layerable
• Has a sticky liner
• Due to the manufacturing process, material may vary in width by 1/4-1/2"
• Can be applied at a low temperature if needed
• REACH compliant
• Certified Öko-Tex® Standard 100 Class I
• Composition: PU CPSIA Certified
• Accessories
• WALAKut Express
• WALAKut HTV
• WALAPresses
• Heat Transfer Equipment

• 250° F-302° F for multi-layering or thick cotton
• 5 seconds
• Warm or Cold
• High, even pressure
• Cut in reverse
• 100% Cotton, 100% Polyester, Elastan, or blends of these textiles.
• Wait 24 hours before first wash. Warm to cold water and tumble dry. Do NOT use bleach. Do NOT dry clean.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*Heat Transfer Warehouse uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)

• WALAKut-Express PDF Instructions