WALAKut Express Neon HTV
WALAKut-Express Neons are a thin, elastic, soft to the hand vinyl that blends well into the textiles, now offered in bright fluorescent colors! Low-temperature application prevents undesirable effects such as glossiness and fiber damage!
- 12 inch width
- 90 micron thick
- Matte finish
- Neon color
- Layerable
- Has a sticky liner
- Due to the manufacturing process, material may vary in width by 1/8-1/4"
- Can be applied at a low temperature if needed
- REACH compliant
- Certified Öko-Tex® Standard 100 Class I
- Accessories
- WALAKut HTV
- WALAPresses
- Heat Transfer Equipment
12" pricing:
12x12 sheet = $3.50
3 foot roll = $8.00
5 foot roll = $12.95
15 yd roll = $35.00
30 yd roll = $68.00
75 yd roll = $162.50
150 yd roll = $314.00
- 250° F-302° F for multi-layering or thick cotton
- 5 seconds
- Warm or Cold
- High, even pressure
- Cut in reverse
- 100% Cotton, 100% Polyester, Elastan, or blends of these textiles.
- Wait 24 hours before first wash. Warm to cold water and tumble dry. Do NOT use bleach. Do NOT dry clean.
Additional Instructions
Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*Heat Transfer Warehouse uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
- Width:
- 12" Width
- blog:
- 127
- blog:
- 49
- Type:
- Neon / Fluorescents
