Features of WALAKut Mesh Heat Transfer Vinyl
- 12" Width
- Perforated holes through the material
- 90 microns thick
- Sticky carrier sheet
- If layered can only be the top layer
- Laser compatible
- Due to the manufacturing process, material may vary in width by 1/4-1/2"
- Accessories
- WALAPresses
- WALAKut HTV
- Heat Transfer Equipment
Features and Benefits:
- Breathable Design: Allows air to pass through, ideal for athletic wear.
- Lightweight: Doesn't weigh down the fabric.
- Durable: Long-lasting even with frequent washing.
- Easy Application: Suitable for various heat presses.
Best Uses:
- Perfect for sports jerseys, workout gear, and any breathable fabric.
- Ideal for creating custom designs on mesh and perforated fabrics.
Pricing:
12" x 12" Sheet = $3.25
1 yard roll = $8.00
5 yard roll = $33.00
10 yard roll = $63.00
25 yard roll = $145.00
54 yard roll = $275.00
- 330° F
- 15 seconds
- Peel warm or cold.
- Medium even pressure
- Cut in reverse Cotton, linen, wool, lycra, spandex, polyester blends.
- NO nylon/ NO mesh
- Wait 24 hours before first wash. Machine wash warm with mild detergent. DO NOT dry clean. NO bleach or fabric softener.
Additional Instructions
Application instructions
For dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.
We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.
Cut Settings for Graphtec CE6000:
Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.
1. Offset: 0
2. Speed: 25 cm/s
3. Acceleration: 4
4. Cut Force: 16
*HTW uses a 45 Degree Blade
Cut Settings for Silhouette Cameo:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Material: Heat Transfer, Smooth
Blade: 3
Speed: 8
Force: 6
Cut Settings for Cricut®:
Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.
Set Material: Iron-On
Pressure: Default
Blade: Fine-Point Blade (Standard)
- dropship_colors:
- Silver, Gold, Rose Gold, Yellow, Royal Blue
- location:
- fargo
- location_colors:
- all
