WALAKut Metallic Puff 10" Heat Transfer Vinyl – Elevate Your Designs with a 3D Metallic Effect
Important Application Notes:
WALAKut Puff Metallic differs from our standard WALAKut Puff line and REQUIRES a 2-press
application process. After the first press, the carrier must be peeled warm and the design
should be covered with a cover sheet, then pressed a second time to activate the puff effect.
Unique Metallic Puff Effect
WALAKut Metallic Puff HTV offers a striking 3D metallic finish. Requires a 2-press application for best results. The first press activates the puff effect, creating dimension. Ideal for bold custom designs on various fabrics.
Durable and Safe for Children’s Apparel
This material is CPSIA certified for use on children’s clothing. Apply at 302-311°F with firm, even pressure. Peel hot for a smooth, lasting result. Wash inside-out with cold water for durability.
- Actual width 9.75"
- Metallic Finish
- Not suitable for layering
- 300-500 Microns thick
- Sticky liner
- CUT SHINY SIDE UP
- CPSIA certified for use on children's clothing
- Laser compatible - this product contains no PVC and will not emit hazardous fumes
- Not recommended to apply this material with a home iron
- WALAKut HTV
- WALAKut Puff
- Accessories
- Heat Presses
10" (9.75") Pricing:
9x12 sheet = $4.00
1 yd roll = $10.00
5 yd roll = $40.00
10 yd roll = $75.00
27 yd roll = $180.00
1 yd roll = $10.00
5 yd roll = $40.00
10 yd roll = $75.00
27 yd roll = $180.00
- 302-311° F
- Two presses - 1 press for 3 seconds, remove carrier, let cool down. Once cooled, press again for 8 seconds.
* Allow metallics to cool before repressing - Peel Hot
- Firm, even pressure
- Cut in reverse
- Cotton, Uncoated Polyester, Fabric Blends, Polyester/Acrylic, and Similar Fabrics - NO NYLON
- Wash inside-out, cold water, gentle cycle. Tumble dry low.
- Type:
- Puff
- Clothing:
- Polyester
- Clothing:
- Cotton
- Clothing:
- Poly/Cotton Blends
- blog:
- 69
- Width:
- 10" Width
- blog:
- 138
- blog:
- 127
- blog:
- 15
- Type:
- Metallic
