Sublimation Car Flag with Pole Heat Transfer Blank
Dye sublimate right onto this specially coated car flag! Perfect for showing off your school colors, team or event!
Product Details
- Size: 15.5" x 10"
- White Polyester material
Decoration Method
- Sublimation Ready
- NOTE: If attempting to sublimate both sides of the flag, ink may show through the other side
Recommended Products
Pricing:
Single Flag = $3.75
Case of 25 = $80.00
CINCINNATI ONLY product; will make your entire order ship from our Cincinnati, OH location.
- 400°F
- 75-90 seconds
- Peel Hot
- Medium to firm pressure
Additional Instructions
Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. 4-5 layers of soft paper towel
3. substrate (flag)
4. transfer
5. teflon sheet or scratch paper
Steps:
1. Lint roll the substrate to remove stray fibers.
2. Spray the transfer with repositionable spray.
3. Position the substrate onto the transfer.
4. Place the transfer and substrate in the press onto the paper towel(transfer on top of substrate).
5. Place the teflon sheet or scratch paper over the substrate and transfer.
6. Press the items using the settings listed above.
7. Remove the transfer from the substrate and items from the press immediately. Use heat resistant gloves if necessary
- the items will be very hot.
Tips:
- If the image of the final product appears light increase the pressure or the dwell time slightly (10-20 seconds).
- If the image on the final product appears blurred or substrate appears yellowed reduce the dwell time slightly (10-20 seconds).
- location:
- Cincinnati
- location_colors:
- all
- Blanks Type:
- Other
